• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED!] Finally!! 3 working monitors under Ubuntu
#1
[SOLVED!] Finally!! 3 working monitors under Ubuntu

It's been a long ride, but finally i've got to the end. After messing with my previous 10.04 installation until it would no longer boot, then to installing 10.10 to find out that it wouldn't recognise multiple graphics cards. Attempting to re-install 10.04 was no walk in the park.. I burnt the disk, wouldn't boot, tried unetbooting, wouldn't boot, burnt 4 disks, wouldn't boot, (This is also after downloading different ISO files), new DVD drive. WALLAH! And here i am, in a clean install of Ubuntu 10.04, 32 bit, desktop edition.

And here's how i did it


Steps

1) System > Administration > Hardware Drivers
(NVIDIA accelerated graphics driver (version current) [Recommended] - Activate.

2) Reboot

3) On reboot, only my main monitor was active, so i enabled my second (on the same card) as another seperate x screen. Resolution keep on auto for all monitors.

4) Reboot - After i rebooted this time my second graphics card and third monitor wasn't even recognised never mind showing, but i went ahead and:

5) Enabled Xinerama

6) Reboot

7) Enabled my third monitor as a seperate x screen. (Now re-recognised with Xinerama enabled)

8) Reboot

9) Re-positioned the monitors in the configuration, dragged / moved to represent the actual positioning on my desk.

10) Reboot

11) :yay :yay

All of these steps were perfomed using the "NVIDIA X Server Settings" under System > Administration.


Configuration as it is now:

[Image: working-nvidia-config.png]


my xorg.conf file

[spoiler][code=other]# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010


Section "ServerLayout"

# Removed Option "Xinerama" "0"
Identifier "Layout0"
Screen 0 "Screen0" 1680 0
Screen 1 "Screen1" 3600 0
Screen 2 "Screen2" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"

# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "DELL P2210H"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 76.0
Option "DPMS"
EndSection

Section "Monitor"

# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "CVT"
HorizSync 31.5 - 80.0
VertRefresh 60.0 - 75.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "NTS"
HorizSync 30.0 - 82.0
VertRefresh 50.0 - 75.0
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTX"
BusID "PCI:1:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8800 GTX"
BusID "PCI:1:0:0"
Screen 1
EndSection

Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 8400 GS"
BusID "PCI:2:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "TwinView" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection[/code][/spoiler]
  Reply
#2
There you go Mark, I figured you would get it eventually. There is no better teacher than failure.
[Image: icpn5k.jpg]
Trolls are the last thing you need to be concerned with.

VCD Wrote:// Forever more, count and reply, bitch.
  Reply
#3

That's me. The thought of giving up never enters my mind. :ninja
  Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Office 2013 has stopped working - Graphics problem Mark 0 4,291 16-02-2014, 05:56 AM
Last Post: Mark
  Ubuntu KDE? DerpyTurtle1337 1 7,183 11-11-2012, 02:10 PM
Last Post: Mark
  How to reboot in to safe mode from Windows 7 – F8 Not Working? Mark 0 8,939 08-03-2012, 10:17 PM
Last Post: Mark
  How to use Gnome instead of Unity in Ubuntu 11.04 Mark 1 8,115 13-10-2011, 06:01 PM
Last Post: Drumm
  How to set up dual / triple monitors in Windows Mark 5 12,377 15-09-2011, 11:27 PM
Last Post: Mark

Forum Jump: