10-07-2011, 02:18 PM
Just a couple pictures of me spraying one of my laptops lid. This was a very quick job, I could of done it a lot better, I also ran out of black spray...
Make sure to cover up the bits that you're not spraying, ideally you take the thing apart so that you just have the lid. This makes the process 10x longer.
2 coats of primer. Yes.. i sprayed on top of that half ass job.
![[Image: Toshiba%20Satellite%20Pro%20A200%20-%2004.JPG]](http://markwood.co.cc/donotdelete/Toshiba%20Satellite%20Pro%20A200/Toshiba%20Satellite%20Pro%20A200%20-%2004.JPG)
Coat of black, this is where it pretty much ran out.
![[Image: Toshiba%20Satellite%20Pro%20A200%20-%2003.JPG]](http://markwood.co.cc/donotdelete/Toshiba%20Satellite%20Pro%20A200/Toshiba%20Satellite%20Pro%20A200%20-%2003.JPG)
Keep going with the black, and clear cloat it if wanted.
![[Image: Toshiba%20Satellite%20Pro%20A200%20-%2001.JPG]](http://markwood.co.cc/donotdelete/Toshiba%20Satellite%20Pro%20A200/Toshiba%20Satellite%20Pro%20A200%20-%2001.JPG)
![[Image: Toshiba%20Satellite%20Pro%20A200%20-%2002.JPG]](http://markwood.co.cc/donotdelete/Toshiba%20Satellite%20Pro%20A200/Toshiba%20Satellite%20Pro%20A200%20-%2002.JPG)
Not my best job, but it's better than it was.
Make sure to cover up the bits that you're not spraying, ideally you take the thing apart so that you just have the lid. This makes the process 10x longer.
2 coats of primer. Yes.. i sprayed on top of that half ass job.
Coat of black, this is where it pretty much ran out.
Keep going with the black, and clear cloat it if wanted.
Not my best job, but it's better than it was.